Pneumatic Air Brake System Dryer w/ Governor and A Port Plug
Pneumatic Air Brake System Dryer with Governor and A Port Plug.
These air dryers form a part of the pneumatic brake system commonly installed on commercial trucks, buses, trailers, and railroad trains. They are used to remove water vapor, moisture, oil impurities from compressed air. The process of air compression raises the dew point of the compressed air relative to free atmospheric air; it generates condensation within pipes which can cause problems like corrosion brake system malfunctioning, and reduces maintenance costs.
Technical Specifications:
- Primary Port: 1/4" NPT
- Primary Port Opening Pressure: 103 PSI
- Secondary Port: 1/4" NPT
- Port A: Plug
- Secondary Port Opening Pressure: 109PSI
- Accessory Ports Opening Pressure: 09PSI
- Suspension Port Opening Pressure: 109PSI
- Heater: 12-Volts DC, 90W
Comes with Safety Caps to Protect the Threads and Mechanism prior Installation.
May also Work as a Replacement for Part: 800383, 060-800383, 5004050, 5004050X, R5004050, FLTAD0383, BW800383, BWR5004050, BW5004613, BW5003424, 745-800383, TWDBEN800383, BEN800383, BAN800383, BX5004050B1, BX800383, ZAC800383, 800383BXW, 5003424.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
More Products
DC-4 Double Check Valve - 1/4 Inch NPT
R-12 Relay Valve 1/2 Inch Delivery - Horizontal Mount Relay Valve
Engineering Grade Composite (EGC) Hand Operated Manifold Dash Valve with One Piece Housing.
Alcohol Evaporator.
