In an automatic transmission system, a shift solenoid is an electronically activated element which opens and closes some valves to control the transmission fluid flow from the gear shifts.
Shift solenoids have a spring loaded plunger covered with a coil of wire.
Through the wire, the plunger makes contact with the engine sensors through electronic signals.
Those sensors indicate when transmission should shift gears according on speed.
When the shift solenoid is activated, the plunger will open some valves to permit the entry of transmission air flow.
That puts pressure on the clutches and bands originating that gear shifts.
While the shift solenoid not receives power, the plunger remains closed.
- 12 volt DC.
- Provides on/off exhaust function.
- Must be installed vertically with air inlet port facing upward.
- Inlet port normally closed- only for alternating use.
- (2) ¼” FPT ports.
- 100-120 PSI standard pressure.
- Attached mounting bracket with 2 x 9/3" diameter mounting holes on 2" center.
- Always use in combination with a momentary contact switch.
- Product Dimensions: 4.6" x 3.6" x 3.3".
- OEM KN68230.
May also Work as a Replacement for Part: 30904, 320051, 401190, 801000, 767653080307, 20QE2100, 213909R91, 213909R92, 258529C91, 270-EMDKN68230, 288905C91, 320051-VV, 650-R955KN68230, 810-320051, 8846-320051, A68230, AC67929, AF68230, Automann 174.KN68230, AV68230, Dayton AVA68230, Eaton A68230, EMDKN68230, E-MDKN68230, Euclid E-MDKN68230N, Haldex KN68230, HDXKN68230, KN68230, KN68230B, MBIKN68230, Midwest 288905C91, Midwest WAKN68230, N15842J, N21038B, Newstar S-8931, R955KN68230, S8931, S-8931, S-8931, VEL320051, Velvac 320051.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
Wednesday, 23 September 2020
Works great. Replaced 3 trucks with that solenoid.
Please log in to write a review. Log in