The Air Brake Service Circuit Stop Light Switch turns on the red brake lights on the vehicle rear lights when the brakes are applied.
Brake lights serve to alert other drivers behind you that you're stopping, backing up, or slowing down. The switch is placed under the dashboard and over the brake pedal.
When driver apply the brake pedal, the lever arm attached to the pedal pushes a plunger inside the brake light switch.
It completes an electrical circuit causing the rear brake lights to turn on.
The Air Brake Service Circuit Stop Light Switch consists of silver contacts and snap action design to increase switch life and it is tested at one million cycles at 30 AMPS.
- Normally Closed At 0 PSI.
- 3-5 PSI Actuation Pressure.
- Single Pole
- Two Terminals.
- 1/4-18 NPT.
- OEM Number: 3250
May also Work as a Replacement for Part: 1324150, 13250, 3250, 325011, Automann 170.0013, Dayton AVBE13250, Euclid E-MDBE13250N, Haldex BE13250, Haldex 13250, KN62010, Midwest WA13250, MP3250, PA3250, UM13250, V325011.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
Pressure Protection Valves